Menu
Cart 0

PrintDry Filament Storage Containers (6-pack)

  • $ 6900


A great storage solution to prevent your 3D printing filaments from absorbing moisture!

Often a new spool of filament will print very good when first removed from it's air tight package, but print quality can deteriorates after a few weeks/months (or hours/days with Nylon) in storage. Most 3D printing filaments (ABS, PLA, PETG, PETT, TPU, PC and especially Nylon) are hygroscopic materials, which have a strong affinity for moisture. Once removed from their original packaging, these filaments can readily begin to absorb moisture from the air. Even a small amount of moisture in the filament can cause streaks, bubbles, burning, brittleness, increased "stringing", and even a chemical reaction (hydrolysis) when the filament passes through the heated nozzle. When this happens, the filament will make a popping/cracking/hissing sound and the 3D prints will have rough/grainy surface finish with reduced physical properties (less tensile and impact strength).

Many people re-use cheap resealable plastic bags to store their filament when not in use. The thin plastic on resealable bags is prone to developing small holes/tears, and the seals can often leak over time making them a poor choice for storage. The PrintDry Filament Storage Containers provides a convenient and effective way to protect your 3D printer filament with thick sturdy walls, a long lasting silicone air seal, and 4 strong clamps. The containers feature walls that are ~15x thicker than the average resealable-plastic bag and are transparent so you do not need to open the containers to see what filament is inside. These containers are great for storing all filaments but are especially great for storing extremely moisture sensitive filaments like nylon, PVA, and water-soluble support materials. The 6-pack of stack-able containers means you can store several spools individually without exposing all your spools to ambient moisture every time you remove a spool like you would if they were all stored in 1 large container. These containers work great when combined with the PrintDry Filament Dryers to keep your filament in peak condition. Want even more protection? Consider the Printdry Vacuum Sealed Filament Storage Containers.

    Specifications:
    Includes:      Six (6) containers and extra desiccant packs (3D printer filaments not included)
    Overall Container Size:  285mm (10.5") diameter x 100mm (4" high
    Maximum Filament spool size:   205mm (8") diameter x 72mm(2.9") high



    We Also Recommend