Cart 0
Taulman3D 680 FDA Nylon filament - MakerTechStore

Taulman3D 680 FDA Nylon filament

  • $ 7000

Nylon 680 was developed at taulman3D to meet certain FDA criteria for clinical and other applications. Nylon 680 is a very high grade nylon made with an FDA approved polymer specifically developed to meet FDA 21 CFR 177.1500 regarding indirect food contact, except for foods with over 8% Alcohol. 680 was designed to print in the same temperature range as other taulman nylons. 680 is more transparent than nylon 645 to support non-destructive visual inspection of the printed part. 680 is a non-leaching FDA nylon that's capable of low temperature sterilization techniques. Specifically, Ethylene oxide and high temperature sterilization as in Flash Steam post processing. 680 is less pliable than nylon 645 as it is intended to support a long list of medical uses. 680 completed community testing in 2014. Nylon 680 comes vacuum packed and boxed. 

Potential uses:

There are many uses in the clinical, food and medical industries.  As any material needs to be fully tested for each use, it will be several months before testing is complete and certified uses are noted.

 Alloy 910                                                              
Recommended Extrustion Temperature: 245°C - 250°C
Recommended Nozzle size: Any Size

Recommended Print Speed:


Recommended Retraction Settings:

0.5 mm per 0.1mm of nozzle diameter

(ie. 2.5mm retraction when using a 0.5mm diameter nozzle)

Recommended Print Surface:

Hot - Glass heated to 45°C with a coat of PVA glue

Cold - BuiltTak with a coat of PVA glue


1 lb. spools

We Also Recommend