Cart 0
Taulman3D Alloy 960 Carbon Fiber

Taulman3D Alloy 960 Carbon Fiber

  • $ 2600

From Taulman3d:

"A high-temperature Alloy 910 based filament with a <10% of Cut Carbon Fiber.

Alloy 960CF will help support the automotive industry as well as those that need an extremely hard yet durable material. Alloy 960CF was developed to support large to extremely large parts where shrinkage or warping would otherwise be an issue. With the increasing sophistication of printers and slicing software, users are finding more requirements to print large enclosures, shrouds and structural components. These parts are usually thin but have large surface angles as well. The 960CF Carbon fiber has the tendency to “visually mask” layer lines while maintaining strength. In applications where rather long parts are needed or parts that need to handle a “cantilever” type strength requirement, 960CF is an excellent solution. The quality of Alloy 920CF is tightly regulated in that the compounding is performed at the Chemical mfg shortly after the batch process. This insures a constant compound from start to end of a spool as well as from spool to spool over years of printing."

Taulman3D 960CF sample prints

  • Tensile = 91MPa
  • Elongation = 8% - 10%
  • Izod Un-notched = 690J/m
  • Printing temperature = 270°C – 280°C
  • Bed temperature = 55°C – 75°C
  • HDT = 111°C

GeckoTek's EZ-STICK HOT build surface works great with all of Taulman3D's nylon-based filaments.

We Also Recommend