PETG Filaments - 1Kg (2.2 lbs) Spool
PETG is a co-polyester (glycol modified Polyethylene terephthalate). Parts printed in PETG generally have less shrinkage, a smoother finish, and a stronger layer-to-layer bond than parts printed in ABS or PLA. PETG does not require a heated bed and has little or no odor when printing. PETG is also much less susceptible to warping than ABS or PLA.
1 Kg (2.2 lb.) spools
PETG | |
Recommended Extrusion Temperature: | 230°C - 260°C |
Recommended Nozzle size: | Any Size |
Recommended Retraction Settings: |
.5mm per 0.1mm of nozzle diameter (ie. 2.5mm retraction when using a 0.5mm diameter nozzle) |
Recommended Print Surface: |
Hot - Glass heated to ~45°C with a coat of glue, or bare glass heated to ~70°C
|
Print Cooling fan? |
Print Cooling fans are recommended with PETG filament. Printers without part cooling fans should be set to print slower than standard ABS printing speeds for high detail prints. |