GeckoTek EZ-Stick HOT
In stock and ready to ship!
We know how frustrating it is when the corners lift, or when prints come loose while printing. EZ-Stik's Advanced Coating Technology is designed to reliably prevent peeling. With EZ-stick there is no need for a raft or to 'squish' the first layer into the build surface. The Advanced Coating Technology in EZ-Stik Hot provides maximum adhesion when heated to prevent warping and easy part removal when cooled. Simply cut your EZ-Stik surface to size with standard scissors then use the peel and stick adhesive backing to attach to your build platform. Works with ABS, PLA, PETT/PETG, Nylon, Composites and more! EZ-Stik hot is highly recommended by Taulman3D for use with their high strength nylon filaments as well.
GeckoTek designed the EZ-Stik Build Surface so that even the most delicate parts release easily. No need to worry about breaking parts during removal. Even under the toughest conditions, EZ-Stik Build Surfaces last over 100 prints with losing adhesion. (Exact life span varies depending on the materials, settings, and 3D printer)
Even though EZ-Stik uses a polymer sheet, it is still very durable. It easily resists light scratches by the nozzle. However, we recommend using a plastic or non-metallic removal tool if needed for the most difficult parts to avoid damaging the coating. There is almost no maintenance needed for GeckoTek Build Surfaces. GeckoTek just recommends that you wipe the surface with diluted isopropyl alcohol wipes every 5-10 prints.
Please note: If using Ninjaflex or other TPU/TPE filaments, extra precautions are recommended. Please make sure the print and bed have cooled down all the way before attempting to remove the print, and take care to ensure the first layer has not been squished into the build plate.