Menu
Cart 0

Impressive Putty (ReMold Putty) 6 oz. Kit (with 2 oz. Activator)

  • $ 2900


Impressive Putty (previously called ReMold Putty) is ComposiMold's newest reusable mold making material in a putty form. It can be applied directly to almost any model, capturing the smallest detail and curing within minutes. ReMold Putty can be used to make molds of sculptures, prototypes, candles, picture frames, coins, etc. You can cast wax, clay, low melt plastics, low melt metal, and a variety of resins into ReMold Putty. It can be remelted and used over and over.

  • Simple two part system
  • High melting point :185°F (85°C)
  • Shore Hardness: 60A
  • No mold container required
  • Reusable
  • Microwaveable
  • Compatible with dozens of casting materials
  • Contains: 6 oz. putty, 2 oz. activator, and a microwaveable bag

DIRECTIONS: Place the Putty in the microwaveable safe bag and add 2 drops of the Activator for every ounce of Putty. Seal the bag and heat the Putty in the microwave until completely melted. Smooth the putty to remove lines and make into a shape large enough to hold your master object. Next, push the ReMold Putty over your master part or push the master part into the putty. Let the ReMold Putty solidify and remove the master object. Make your castings and then remelt to reuse!

 

Important note:

The activator is important for solidifying the mold and useful as a built in mold release, but it will slowly leak out of the mold over time. Too much activator on the mold surface is undesirable, remove the excess and pools of the activator with a sponge or dry cloth before pouring your casting resin. Once a mold has been made, it should be poured (cast) as soon as possible if you want to avoid the leakage.

If the activator is not properly cleaned off the mold, it is possible for resins and other casting materials to become discolored by the mold (but does not seem to effect the quality of the cast.)


We Also Recommend